Contents Index Search Previous Next
G.2.3 Model of Fixed Point Arithmetic
1
In the strict mode, the predefined arithmetic
operations of a fixed point type shall satisfy the accuracy requirements
specified here and shall avoid or signal overflow in the situations described.
Implementation Requirements
2
The accuracy requirements for the predefined fixed
point arithmetic operations and conversions, and the results of relations
on fixed point operands, are given below.
3
The operands of the fixed point adding operators,
absolute value, and comparisons have the same type. These operations
are required to yield exact results, unless they overflow.
4
Multiplications and divisions are allowed between
operands of any two fixed point types; the result has to be (implicitly
or explicitly) converted to some other numeric type. For purposes of
defining the accuracy rules, the multiplication or division and the conversion
are treated as a single operation whose accuracy depends on three types
(those of the operands and the result). For decimal fixed point types,
the attribute T'Round may be used to imply explicit conversion with rounding
(see
3.5.10).
5
When the result type is a floating point type,
the accuracy is as given in
G.2.1.
For
some combinations of the operand and result types in the remaining cases,
the result is required to belong to a small set of values called the
perfect result set;
for other combinations,
it is required merely to belong to a generally larger and implementation-defined
set of values called the
close result set. When the result type
is a decimal fixed point type, the perfect result set contains a single
value; thus, operations on decimal types are always fully specified.
6
When one operand of a fixed-fixed multiplication
or division is of type universal_real, that operand is not implicitly
converted in the usual sense, since the context does not determine a
unique target type, but the accuracy of the result of the multiplication
or division (i.e., whether the result has to belong to the perfect result
set or merely the close result set) depends on the value of the operand
of type universal_real and on the types of the other operand and
of the result.
7
For a fixed point
multiplication or division whose (exact) mathematical result is v,
and for the conversion of a value v to a fixed point type, the
perfect result set and close result set are defined as follows:
8
- If the
result type is an ordinary fixed point type with a small of s,
9
- if v is an integer multiple
of s, then the perfect result set contains only the value v;
10
- otherwise, it contains the integer
multiple of s just below v and the integer multiple of
s just above v.
11
The close result set is an implementation-defined
set of consecutive integer multiples of s containing the perfect
result set as a subset.
12
- If the
result type is a decimal type with a small of s,
13
- if v is an integer multiple
of s, then the perfect result set contains only the value v;
14
- otherwise, if truncation applies
then it contains only the integer multiple of s in the direction
toward zero, whereas if rounding applies then it contains only the nearest
integer multiple of s (with ties broken by rounding away from
zero).
15
The close result set is an implementation-defined
set of consecutive integer multiples of s containing the perfect
result set as a subset.
16
- If the
result type is an integer type,
17
- if v is an integer, then
the perfect result set contains only the value v;
18
- otherwise, it contains the integer
nearest to the value v (if v lies equally distant from
two consecutive integers, the perfect result set contains the one that
is further from zero).
19
The close result set is an implementation-defined
set of consecutive integers containing the perfect result set as a subset.
20
The result of a fixed point multiplication or
division shall belong either to the perfect result set or to the close
result set, as described below, if overflow does not occur. In the following
cases, if the result type is a fixed point type, let s be its
small; otherwise, i.e. when the result type is an integer type,
let s be 1.0.
21
- For a multiplication or division neither
of whose operands is of type universal_real, let l and
r be the smalls of the left and right operands. For a multiplication,
if (l · r) / s is an integer or the reciprocal
of an integer (the smalls are said to be ``compatible'' in this
case), the result shall belong to the perfect result set; otherwise,
it belongs to the close result set. For a division, if l / (r
· s) is an integer or the reciprocal of an integer (i.e.,
the smalls are compatible), the result shall belong to the perfect
result set; otherwise, it belongs to the close result set.
22
- For a multiplication or division having
one universal_real operand with a value of v, note that
it is always possible to factor v as an integer multiple of a
``compatible'' small, but the integer multiple may be ``too big.''
If there exists a factorization in which that multiple is less than some
implementation-defined limit, the result shall belong to the perfect
result set; otherwise, it belongs to the close result set.
23
A multiplication P * Q of an operand of a fixed
point type F by an operand of an integer type I, or vice-versa, and a
division P / Q of an operand of a fixed point type F by an operand of
an integer type I, are also allowed. In these cases, the result has a
type of F; explicit conversion of the result is never required. The accuracy
required in these cases is the same as that required for a multiplication
F(P * Q) or a division F(P / Q) obtained by interpreting the operand
of the integer type to have a fixed point type with a small of
1.0.
24
The accuracy of the result of a conversion from
an integer or fixed point type to a fixed point type, or from a fixed
point type to an integer type, is the same as that of a fixed point multiplication
of the source value by a fixed point operand having a small of
1.0 and a value of 1.0, as given by the foregoing rules. The result of
a conversion from a floating point type to a fixed point type shall belong
to the close result set. The result of a conversion of a universal_real
operand to a fixed point type shall belong to the perfect result set.
25
The possibility of overflow in the result of
a predefined arithmetic operation or conversion yielding a result of
a fixed point type T is analogous to that for floating point types, except
for being related to the base range instead of the safe range.
If
all of the permitted results belong to the base range of T, then the
implementation shall deliver one of the permitted results; otherwise,
26
- if T'Machine_Overflows
is True, the implementation shall either deliver one of the permitted
results or raise Constraint_Error;
27
- if T'Machine_Overflows is False, the
result is implementation defined.
Contents Index Search Previous Next Legal